byko-test 9500 Basic油漆测厚仪涉及哪些领域的行业应用？
/c61738/products/d.html
Dry film thickness gauge with fixed and cable sensor
Article No. 3676
byko-test 9500 Basic
Basic DFT gauge Fe/NFe Substrates with fixed and cable sensor
· For measurement on ferrous and non-ferrous substrates
· Total Memory 10.000 readings
· IP 65 dust and splash water protection
· USB connectivity and PC software
· ISO 17025 certificate included
窗体底端
Features
The byko-test 9500 dry film thickness gauge has a modular design to accommodate a wide range of applications.
· Easy to use operator menu
· Temperature compensation directly in the sensor
· Precise measurements even on curvatures and small parts
· Easy adjustment on rough, smooth or curved substrates
· 61mm (2.4”) color display, resistant against scratches and chemicals (Level H6)
· Stainless steel probe with dust protection membrane (IP65)
· Optimal readability of flip display even in direct sunlight, brightness can be adjusted automatically or manually
· Intuitive menu guidance for the gauge and software, report by 3 clicks
· Freely assignable key for individual fast access
· Simple and fast creation of documentation and reports
· Multiple languages
Technical Attributes
Technical Specifications
· Measuring Range Mils / µm
0 - 118 mil 0 - 3000 µm
· Full Scale Calibration Range Mils/ µm
-
Thickness Measurement
· Measuring Range
0 - 3000 µm
· Measuring Range
0 - 118 mil
· Accuracy
Fe: 0-2000µm: ± (1 μm + 2 %)
NFe: 0-2000µm: ± (2 μm + 2 %)
Fe & NFe > 2000µm ± 3 %
· Measuring area, min.
14.5 mm ø
· Measuring area, min.
0.6 in ø
· Minimum Curvature
Fe (NFe) convex: 4 mm (30mm) with 2-point-adjustment, zero and 250 μm on original substrate 6 mm (50 mm) with zero adjustment on original substrate
· Minimum Curvature
Fe (NFe) convex: 0.16 in (1.2 in) with 2-point-adjustment, zero and 9 mils on original substrate 0.24 in (2 in) with zero adjustment on original substrate
· Minimum substrate thickness
Fe (NFe) 25 μm (20 µm) with 2-point-adjustment, zero and 250 μm on original substrate 100 μm (50 µm) with zero adjustment on original substrate
· Minimum substrate thickness
Fe (NFe) 1 mil (0.8 mils) with 2-point-adjustment, zero and 9 mils on original substrate 4 mils (2 mils) with zero adjustment on original substrate
· Resolution
Adjustable: 0,1 µm (0,1 mils) or 0,01 µm (0,01 mils)
General
· Interface
USB
· Power supply
2 x AA Batteries 1.5 V Alkali, or rechargeable AA 1.2 V
· Weight
0.27 kg
· Operating temperature
-20 - 70 °C
· Storing temperature
-20 - 70 °C
· Operating temperature
-4 - 158 °F
· Storing temperature
-4 - 158 °F
· Dimensions: L x W x H
16 x 6.8 x 3.8 cm
· Dimensions: L x W x H
6.3 x 2.7 x 1.5 in
Delivery Content
byko-test 9500 Basic w/o probe
Dual Probe 3mm for byko-test 9500, ISO 17025 (3678)
Probe holder and cable
Fe- and NFe-reference plate with two test foils
2 Mignon batteries 1,5 V (AA) alkaline
Certificate
Operating Manual